Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: Sequoia Doc ID: RM000002XF3002X
Title: SEAT: FRONT SEATBACK HEATER: INSTALLATION (2008 Sequoia)

INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

  • Use the same procedure for the LH side and RH side.
  • The procedure listed below is for the LH side.

1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

3. INSTALL SEATBACK COVER WITH PAD SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

4. INSTALL FRONT SEAT HEADREST SUPPORT SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

5. INSTALL FRONT SEAT CUSHION SHIELD INNER LH SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION (2008 Sequoia)+

7. INSTALL FRONT SEAT CUSHION SHIELD LH SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

8. INSTALL RECLINING POWER SEAT SWITCH KNOB LH SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REASSEMBLY (2008 Sequoia)+

10. INSTALL FRONT SEAT ASSEMBLY LH

(a) Install the front seat SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION (2008 Sequoia) .